EDP 550
Typical Applications :
Liners/ components which are subjected to abrasion/impact (screens in industry)
Description :
Cr – C system. good abrasion & moderate impact up to 250o C
Hardness : 54 – 58 HRc
CDP 4601
Typical Applications :
Liners/ components which are subjected to severe abrasion / impact (screens in steel industry / fancasing /VRM Liners etc)
Description :
Cr – B – C system. High abrasion & low impact up to 250o C
Hardness : 54 – 60 HRc
EDP 4600*
Typical Applications :
Liners/ components which are subjected to high abrasion/impact upto 400oC
Description :
Cr – Nb – C system. High abrasion & medium impact up to 400o C
Hardness : 56 – 62 HRc
CDP 4666
Typical Applications :
Liners/ components which are subjected to high abrasion/impact upto 450oC
Description :
Cr – Nb – B – C system. Severe abrasion & medium impact up to 450o C
Hardness : 58 – 64 HRc
EDP 3852*
Typical Applications :
Hot gas ventilators, hot gas ducts/pipes, coke oven pusher plates etc upto 600oC
Description :
Cr – Nb – Mo – V – W – C system. High abrasion & erosion up to 600o C
Hardness : 55 – 60 HRc
CDP 3952
Typical Applications :
BLT distribution chutes / MTA plates, hot gas ventilators, hot gas ducts/pipes up to 650oC
Description :
Cr – Nb – Mo – V – W – C system. Severe abrasion & erosion up to 650o C
Hardness : 58 – 64 HRc
EDP 6517*
Typical Applications :
Crusher liners, lining of chutes / hoppers subjected to high impact in mining.
Description :
Cr – Ti – Mo – C system. High impact abrasion & erosion up to 500o C
Hardness : 50 – 55 HRc
Double Coated System
Typical Applications :
Lining of chutes / hoppers subjected to high impact & abrasion
Description :
Cr – Ni – Mn – B – C system. Impact & abrasion up to 250o C
Hardness : 52 – 58 HRc
TenaPlate 518
Typical Applications :
Secondary crusher discharge chutes, crusher body liners, material handling impact zone liners, flapper gates, impactor liners, deflector plates etc.
Description :
Unique composite wear plate for heavy impact combined with pressure and abrasion with outstanding wear properties up to 400oC
Hardness : 50 – 60 HRc (First Layer)
Hardness : 45 – 55 HRc (Second Layer)
EDP - 600
Typical Applications :
Guide vanes, O-Sepa guide segments, louver plates, bell housing VRM body liners, coal mill body liners, coal mill louvers, nozzle ring segments etc.
Description :
High volume fration of Cr – C with high wear factor>50 (ASTM G65, Type A)
Hardness : 60 – 63 HRc
EDP - 550 (5 +3)
Typical Applications :
Fan blades, fan casings, exhauster fan blade, suction ducts, volute casing, skirt liners, classifier blades etc.
Description :
Thin wear plates for energy saving applications
Hardness : 54 – 58 HRc
SecuraPlate 007
Typical Applications :
Strong rooms, vault doors, safes, safe deposit lockers, security doors etc.
Description :
Wear plates with improved cutting resistance both by abrasive and flame which delays cutting time to combat burglay.
Hardness : 54 – 58 HRc
Freequently Asked Question
In an extensive global network of service hubs, PrimeServ Omnicare covers maintenance, repair and reconditioning of the many different pieces of equipment that make up your business – in customized contracts that make sense for you.