EutecTrode 2 ac/dc+
An advanced electrode for applications subjected to abrasive wear.
Typical Applications :
Buckets, shovels, excavating equipment, tempers, scrapers.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 95 - 100 | 85 - 95 |
| 4.00 | 125 - 150 | 90 - 165 |
| 5.00 | 175 - 200 | 140 - 165 |
EutecTrode 2B ac/dc+
Anti-spalling weld deposit with excellent cushioning, good impact resistance & high compressive strength.
Typical Applications :
For built-up prior to hard facing for mill pinions, side ways, hammers, wobblers, excavators, sprockets, rollers, shaft and gear teeth.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 4.00 | 130 - 140 | 110 - 125 |
| 5.00 | 160 - 175 | 135 - 150 |
ToolTectic 6HSS ac/dc+
Special electrode to develop tools for cutting and piercing of all metals.
Typical Applications :
Composite high-speed -steel dies, tools, trimming dies, shears, punches.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 75 - 90 | 50 - 65 |
| 3.15 | 105 - 120 | 80 - 95 |
| 4.00 | 130 - 140 | 110 - 120 |
CP HFD 010 ac/dc+
Repairs and build-up of drop forging tools and damaged profile.
Typical Applications :
Drop forging dies, punches, inserts.
Recommended Amperages :
| Size (mm) |
I - Range |
|---|---|
| 2.50 | 90 - 130 |
| 3.15 | 120 - 160 |
| 4.00 | 150 - 160 |
CPSM 022 ac/dc+
High strength electrode for joining dissimilar steels and overlay on low alloy steels.
Typical Applications :
Sugar mills rolls, bearing areas of shafts, joining dissimilar steels.
Recommended Amperages :
| Size (mm) |
I - Range |
|---|---|
| 2.50 | 40 - 70 |
| 3.15 | 70 - 100 |
| 4.00 | 90 - 140 |
| 5.00 | 140 - 180 |
CPBF 024 ac/dc+
Heat treatable alloyy with good resistance to impact and compressive load upto 500oc
Typical Applications :
Blast furnace bells (Seat area), rolling mill rolls, shear knives, cable sheaves/pulleys, winches, crushing hammers dredge cylinders.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 110 - 150 | 90 - 130 |
| 4.00 | 160 - 180 | 140 - 160 |
| 5.00 | 180 - 200 | 160 - 180 |
DieTec D35 dc+
High strength electrode for rebuilding of drop-forging dies
Typical Applications :
Rebuilding of worn-out drop forging dies, punches, inserts.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 4.00 | 130 - 170 |
| 6.00 | 210 - 240 |
| 8.00 | 240 - 280 |
DieTec p35 dc+
High strength electrode for rebuilding of Press-forging dies and tools
Typical Applications :
Rebuilding of worn-out drop forging dies, punches, inserts.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 4.00 | 130 - 170 |
| 6.00 | 210 - 240 |
| 8.00 | 240 - 280 |
AutoTec CL 45 dc+
A new generation electrode for surfacing of Cr-Mo alloyed cast iron dies
Typical Applications :
Maintatenace and repair welding of blank holders of automotive double action and single action press tool, punches of double action tools subjected to high degree of adhesssive wear.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 3.15 | 90 - 130 |
| 4.00 | 130 - 170 |
AutoTec ST 46 dc+/-
Electroden with excellent searinrng properties for automotive die apllications
Typical Applications :
Repair and build up shaetring blades, planer plates, anvils, wood working tools, precussion drills, clamping tools, pressure rollers etc.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 3.15 | 90 - 130 |
| 4.00 | 130 - 170 |
CPET 071 ac/dc+
Unique tubular electrode with high abrasion resistance property
Typical Applications :
Coal burner nozzle, tips crushher hammers ID fans, grizzly baes, crusher housing, scraper blades bucjket teeth & lips.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 6.00 | 100 - 130 |
| 8.00 | 150 - 200 |
CPET 072 ac/dc+
Tungsten carbide based tubular electrode for severe abrasive wear
Typical Applications :
FOr hard-surfacing of fans and pump impellers,pug mill auggers and knives,sand and gravel chutes, tongs,feed screws,ripper teeth and scraper mixer blades.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 6.00 | 100 - 130 |
PyroCarb 077 dc+
An electrode for high temperature abrasion & erosion
Typical Applications :
Sinter star breakers, tip casting coke pusher shoes,billet conveyer guide, hot salg,conveyers, augers and clinker grinders.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 150 - 170 | 100 - 120 |
| 4.00 | 190 - 250 | 140 - 160 |
VanCarb78 ac/dc-
An advanced wear facing electrode designed for severe abrasion applicationunder pressure and moderate impact even at high temperatures
Typical Applications :
Table liners, roler, excavator buckets,dragger & shovel buckets, coponets Subjected to severe grinding abrasion.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 100 - 140 | 100 - 120 |
| 4.00 | 130 - 170 | 130 - 150 |
SuperGrip 88 ac/dc+
Special electrode for gripping & wer protection of sugarcane crusher roll teeth
Typical Applications :
Gripping & wear production of sugarcane crusher roll teeth “in situ” & with “juice-on”.
Recommended Amperages :
| Size (mm) |
I-Range | |
|---|---|---|
| 4.0 x 455 |
150- 200 (Day Acring) |
180- 220 (Wel Arcing) |
SuperGrip 123
A wear resistant hard sufacng ‘paint-on-paste’ for high wear’ applications
Typical Applications :
ID fan bladees, scrappers, screw conveyors, FK pump screws, air separetor guide, sinter fans, PA fain etc.
Xuper 185 XFC
Flux coated brazing alloy for built up & overlay application on all ferrous and non-ferrous alloys
Typical Applications :
Gear teeth, shafrs, bearing seat, pistons spockets, pump bodies, impellers,wear pads, guides
Size :
| Size (mm) |
|---|
| 3.15 |
| 2.5 |
EutecTrode 400 ac/dc+
A versatile electrode with excellent resistance to impact with work hardening capability
Typical Applications :
Crusher hamemr, wobblers, frogs, sprockerts, buckets teeth, wear parts, shovel track pad, Under carriage components , scraper blades
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 120 - 140 | 100 - 120 |
| 4.00 | 160 - 190 | 130 - 140 |
| 5.00 | 180 - 200 | 160 - 190 |
XHD 646 ac/dc+
A high alloy electrode for wear protective coating & high strength joining
Typical Applications :
Under carriage parts, sprockets, ripper shanks.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 100 - 140 | 75 - 100 |
| 3.15 | 140 - 170 | 90 - 130 |
| 4.00 | 180 - 250 | 120 - 160 |
| 5.00 | 210 - 260 | 160 - 190 |
EutecTrode 700 ac/dc+
A versatile electrode offers single layer hardness with superior abrasion resistance
Typical Applications :
Jaw crucher plate, excavator bucket, lips teeth, fan blades, hammers, scrapper, augers, pulveriser.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 110 - 130 | 90 - 110 |
| 4.00 | 150 - 170 | 130 - 150 |
| 5.00 | 180 - 200 | 160 - 180 |
Xuper TurboTec 5300 ac/dc+
Wear facing alloy for proetctive coating, repair and joining application on 13% Cr-steels
Typical Applications :
Hydraulic turbine, pump housings, die casting moulds, valves, shafts, rolls.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 100 - 120 | 100 - 110 |
| 4.00 | 130 - 140 | 120 - 130 |
ChromCarb N* 6006 ac/dc+
An unique electrode for applications subjected to abrasion, erosion, corrosion combined with impact
Typical Applications :
Augers, screw conveyors, scrapers, paddles, wear pads, impactor bar, pusher shoes, impeller etc.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 100 - 120 | 80 - 100 |
| 4.00 | 145 - 160 | 120 - 135 |
| 5.00 | 180 - 200 | 160 - 180 |
EutecTrode 6450 ac/dc+
An advance work hardenable with superior anti-impact property coupled with pressure and abrasion.
Typical Applications :
Track rollers, hydraulic turbines, crusher hamemrs, overhead gantry tracks, drive sprocket wheels, conveyor rolls, crossing and points, cushion layer applications prior to final hardfacing.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 130 - 160 | 100 - 130 |
| 4.00 | 150 - 180 | 120 - 150 |
TriboTuf 6517 ac/dc+
A unique titanium carbide alloy system for wear – facing against severe impact & abrasion.
Typical Applications :
Clinker breaker hammers, blow bars, roller press rolls, cane knives, shovel buckets, shredders, augers, scraper blades, tamping tools etc.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 3.15 | 70 - 100 |
| 4.00 | 100 - 130 |
| 5.00 | 120 - 160 |
XHD AbraTec N*6710 ac/dc+
Very high abrasion resistant alloy with extra high deposition rates
Typical Applications :
Reclaimer bucket, stacker bucket, dragline bucket, lips, tooth points, cutting edges, scraper blades, crushing hammers, conveyor chains, mixer blades, sludges pumps etc.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 150 - 170 | 100 - 120 |
| 4.00 | 210 - 250 | 160 - 200 |
| 5.00 | 250 - 280 | 190 - 200 |
XHD AbraTec N*6715 ac/dc+
Weld metal with outstanding abrasive wear resistance even at elevated temperatrue
Typical Applications :
Sinter star crusher, grate bars, clinker conveyor chains, coke pusher shoes, augers, billet conveyor guides, hot slag conveyor, blast furnace hoppers pug mill knives.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 150 - 170 | 120 - 140 |
| 4.00 | 200 - 220 | 140 - 160 |
| 5.00 | 230 - 250 | 160 - 180 |
EutecTrode 6800 ac/dc+
A High alloy electrode for joining and overlaying of nickel based alloys
Typical Applications :
Hot forging, cutting tools, die stamps, vats, retorts, pipe lines, pumps, pickling/plating tanks.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.5 | 75 - 90 | 50 - 65 |
| 3.15 | 105 - 130 | 70 - 95 |
| 4.00 | 130 - 160 | 90 - 120 |
| 5.00 | 165 - 200 | 125 - 165 |
Xuper Dril-Tec 8800
Composite gas brazing filler rod with hard carbides embedded in tough matrix
Typical Applications :
Drill bits, stabiliser, fishing tool, masonry drill, rotary cutting tool.
Availabe Size :
| Carbide MeshSize (mm) |
Casting Flux Colour |
|---|---|
| -3.2 +1.5 | Pink |
| -5.0 +3.2 | Yellow |
| -6.0 +5.0 | Blue |
| -10.0 +6.0 | Green |
EutecDur N 9060 ac/dc+
Cobalt base alloy with excellent wear resistance at elevated temperature.
Typical Applications :
Drill collars, chemical valve seats, pump sleeves, wear pads, screw conveyors.
Recommended Amperages :
| Carbide MeshSize (mm) |
Casting Flux Colour |
|---|---|
| 3.15 | 70 - 100 |
| 4.00 | 100 - 150 |
| 5.00 | 130 - 190 |
EutecDur 9080 ac/dc+
Cobalt base alloy with superior wear properties for critical surfacing and repair applications at high temperatures.
Typical Applications :
hydraulic turbine parts, hot cutting tools, chemical and high pressure steam valves, hot forming rolls and dies, augers, exhaust valves.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 3.15 | 90 - 100 | 70 - 90 |
| 4.00 | 120 - 140 | 90 - 120 |
| 5.00 | 150 - 170 | 120 - 150 |
EutecDur N 9120 ac/dc+
Cobalt alloy based electrode with excellent resistance to heat, impact and abrasion
Typical Applications :
Hot pressing dies, shear blades, hot cutting blades, hot hardness dies.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 3.15 | 70 - 100 |
| 4.00 | 100 - 150 |
| 5.00 | 130 - 190 |
NanoCrab 110 ac/dc+
Scientifically engineered electrode based on Nano Technology, that exhibits extraordinary wear resistance given at elevated temperatures.
Typical Applications :
Giizy bars, exhaust fans, mixer blades, furnace chutes, scrappers sinter crusher bars, sinter plant fans, screw conveyers and many other equipment from severe abrasion and erosion at elevated temperatures.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 4.00 | 130 - 170 |
Freequently Asked Question
In an extensive global network of service hubs, PrimeServ Omnicare covers maintenance, repair and reconditioning of the many different pieces of equipment that make up your business – in customized contracts that make sense for you.