Hand-O-Matic ac/dc-
All position electrode for welding of low carbon thin sheet from and plates.
Typical Applications :
Containers, ducts, tanks, bus bodies, air conditioning unit, machine guards, pipe lines.
Recommended Amperages
| Size (mm) |
Amperage |
|---|---|
| 2.5 | 50 - 90 |
| 3.15 | 90 - 140 |
| 4 | 120 - 170 |
| 5 | 140 - 200 |
Eutec-Tinweld 1
Paint-on solder paste for soldering of dissimilar metals except Al and Mg
Typical Applications :
nstruments,.gauges, tinning radiator repair, costume jewellery.
CP HFD 011 ac/dc+
High strength electrode for joining and repair of cast steels and HSLA steels.
Typical Applications :
Hammer bases, columns, rams, sow block, keyways, kiln shell.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 3.15 | 90 - 130 |
| 4 | 120 - 160 |
| 5 | 150 - 190 |
Xuper 16 XFC
Flux coated brazing rod suitable for joining of dissimilar steel to Cu alloy including Ni enhanced high strength bronzes.
Typical Applications :
Tubular chassis, frames, drills and cutters, carbide tipping, key, composite tools and dies, steel furniture.
Recommended Amperages :
| Size (mm) |
|---|
| 2.5 |
| 3.15 |
CPEM 021 ac/dc+
Electrode for high strength joining of low, medium carbon and low alloy steel.
Typical Applications :
Buckets, boom, stick, C frame & undercarriage components of earthmoving equipment.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 3.15 | 55 - 100 |
| 4 | 85 - 140 |
| 5 | 135 - 185 |
Xuper 145 XFC
Flux coated brazing rod for joining all type of steel, stainless steel, cu alloy, cast iron & galvanized steel.
Typical Applications :
Exhaust manifold, metal frames, car bodies, piping, flanges, cast iron housing, copper base plumbing and galvanised sheets &tubes.
Recommended Amperages :
| Size (mm) |
|---|
| 3.15 |
| 5.00 |
Xuper 660 NH ac/dc+
Moinsture resistant electrode for welding low alloy and high tensile steels.
Typical Applications :
Crane jibs, frames, , truck chassis, heavy equipment maintenance.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 70 - 80 | 60 - 70 |
| 3.15 | 120 - 135 | 100 - 115 |
| 4.00 | 150 - 165 | 135 - 150 |
| 5.00 | 185 - 200 | 165 - 185 |
Eutec Trode 670 ac/dc+
Universal electrode for joining of different steel with higt strengh and corrosion resistance.
Typical Applications :
Alloy steel pump, valves, overlaying shafts, joining unknown stainless steel, furnace parts.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 65 - 75 | 40 - 55 |
| 3.15 | 90 - 110 | 80 - 90 |
| 4.00 | 120 - 140 | 100 - 120 |
| 5.00 | 160 - 180 | 150 - 160 |
Eutec Trode 680 ac/dc+
Very low head input electrode for joining, built-up of dissimilar & difficult to weld steel.
Typical Applications :
Chassis frames, gears, springs, tool steels, dissimilar alloy steels joining.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 60 - 70 | 50 - 60 |
| 3.15 | 90 - 100 | 75 - 90 |
| 4.00 | 110 - 140 | 90 - 110 |
| 5.00 | 160 - 180 | 150 - 160 |
Xuper 680 S ac/dc+
Very low head input electrode for joining, built-up of dissimilar & difficult to weld steel.
Typical Applications :
Joining and buttering of thin, difficult-to-weld steels including cast steels, high carbon steels, high alloy steel, tool steels and of unknown composition. e.g. bearing area of shafts, edge build-up of gears, keyways, bellows etc.
Recommended Amperages :
| Size (mm) |
Amperage |
|---|---|
| 1.6 | 25 - 35 |
Xuper 680 CGS ac/dc+
Weld metal with high toughness, high strength &ductility for joining dissimilar steels.
Typical Applications :
Joining dissimilar steels, dies, tools, springs, machinable build-up & overlay.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 60 - 70 | 45 - 60 |
| 3.15 | 80 - 100 | 70 - 80 |
| 4.00 | 120 - 145 | 100 - 120 |
| 5.00 | 170 - 200 | 145 - 170 |
EutecRod 1601
Low temperature silver brazing alloy for high strength joining of dissimilar metals.
Typical Applications :
Carbide tipping, joining sheet metal, joining tubular steels, alloy and mild steel to stainless steel.
Rod : 1.6, 2.0, 3.15mm
Shim : 25mm x 0.075mm
Bonding Temperature : 700℃
Tensile Strength : 42 Kg/mm2(60,000 psi)
Xuper Nucleo Tec 2222 dc+
Electrode for joining high alloy steels subjected to thermal cycling and joining with low effects of HAZ.
Typical Applications :
Maintenance and repair of high alloy steels subjected to cryogenic & thermal cycling, joining & repair of heavily constrained and massive sections,
draw bars & connecting hitches, tongs, flame hardening equipment , hevy cross section gears, furnance parts, kiln tyes.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 60 - 80 | 50 - 70 |
| 3.15 | 80 - 100 | 70 - 90 |
| 4.00 | 110 - 130 | 90 - 100 |
XHD 2222 ac/dc+
Special coated electrode for joining and repair of heavy and massive sections and dissimilar steels.
Typical Applications :
Rotary kiln tyres, hear treatment equipment such as retorts, racks, trays, tongs etc, earthmoving eqiuipment, cryogenic equipment, joining dissimilar combinations of steels.
Recommended Amperages :
| Size (mm) |
I - Range | II - Range |
|---|---|---|
| 2.50 | 90 - 125 | 80 - 90 |
| 3.15 | 130 - 170 | 110 - 130 |
| 4.00 | 160 - 200 | 140 - 160 |
Freequently Asked Question
In an extensive global network of service hubs, PrimeServ Omnicare covers maintenance, repair and reconditioning of the many different pieces of equipment that make up your business – in customized contracts that make sense for you.